Axminster HBS350N Instrucciones de operaciones descargar pdf (Pagina 8)

Main Assembly

Mounting the saw table

The saw table can be ﬁtted without removing the

blade. However, if you would feel more comfortable

not having to manoeuvre the table around the blade

(the table is quite heavy), remove the blade by open-

ing the top and bottom covers, release the tension

on the blade by backing off the tensioning wheel, see

ﬁg 01-02.

Fig 01-02

Blade tensioning handle

Blade

Step 1 Remove the table stabilising bolt and the

table insert, see ﬁgs 03-04. Lift the table (1), slide

the blade through the table slot and lower the table,

guiding the threaded bolts through the holes in the

tilt quadrant housing, see ﬁg 05. Screw on the table

clamping handles (I) and tighten, see ﬁg 06. Replace

the stabilising bolt.

DO NOT OVERTIGHTEN!

Fig 03-04

Fig 05-06

Step 2 Locate the fence rear guide rail (3) and the

three M6 hex bolts and washer (H). Line up the

pre-drilled holes in the guide rail with the holes in

the saw table (1) and secure in place using the M6

Stabilising bolt

Table insert

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Sin comentarios

Axminster HBS350N Instrucciones de operaciones Pagina 8