Axminster T-2000CK Manual de instrucciones descargar pdf (Pagina 10)

Assembly Instructions

Fig 14-15

Clamping ring

Rim

Step 9 Locate the bin cover (10), 1/4 " Hex bolts (h) and

1/4" domed head nuts (c). Place the bin cover (10) face

up, on top of the funnel assembly (11). Line up the arrow

marker labels and pre-drilled holes, place a Hex bolt (h)

down through one of the holes and lightly secure with

a domed head nut (c). (see ﬁgs 16-17) Repeat for the

remaining holes then fully tighten.

Fig 16-17

You will require the bin (9), bin castor wheels (21), bin

lever clamps with Phillips screws and nuts (23), bin handle

(17), 1/4" domed nuts (c), 1/4" Phillips screws (g), dust bag

(20), ﬂexible hose (8) and large jubilee clips (k).

Step 10 Turn the bin (9) on its side and screw on the four

castor wheels (21) into the threaded holes to the base of

the bin and tighten the nuts using the supplied spanner

(m), see ﬁg 18.

Fig 18

Step 11 Turn the bin (9) upright, locate the bin lever

clamps (23) remove the four nuts and screws to one of

the clamps and place safely aside. Line up the holes in the

bin lever clamp (23) with the four holes to the side of the

bin (9), (NOTE: make sure the lever clamp is the correct

way round), replace the screws and nuts you removed

earlier, securing the lever clamp in position. (see ﬁg 19-20).

Repeat the process for the remaining clamps.

Fig 19-20

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Sin comentarios

Axminster T-2000CK Manual de instrucciones Pagina 10