Axminster TS-200 Instrucciones de operaciones descargar pdf (Pagina 12)

Assembly

10. Remove the two clamping handles, washer from

the fence assembly and place aside, remove the two

coach bolt and insert them to the opposite side.

Locate the rip fence extension and insert the two

coach bolts into one of the two ‘T’ slots in the fence

extension. Replace the washers and clamping

handles you removed earlier. We advise you move

the rip fence extension down until the end face is

centred with the blade, see ﬁg 23-24-25.

Fig 23-24-25

11. Slide the rip fence assembly (E) up against the

blade and check the index marker on the magnify-

ing glass reads ‘zero’ on the scale. If adjustment is

required loosen the fence rail (F) and adjust until it

reads ‘zero’. Secure the fence rail, see ﬁg 25-26-27.

9. Move the fence (E) until it’s in line with the tables

‘T’ slot, see ﬁg 20. If the fence is out of alignment

loosen the four cap head screws on top of the rip

fence assembly and adjust the fence until its in

alignment with the ‘T’ slot, re-tighten the cap head

screws, see ﬁg 21-22.

Fig 20

Fig 21-22

Cap head screws

Rip fence extension

Coach bolt

Hex key

‘T’ Slot

Fig 25-26-27

Magnifying glass

Scale

Index marker

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Sin comentarios

Axminster TS-200 Instrucciones de operaciones Pagina 12