Axminster Router Elevator Especificaciones descargar pdf (Pagina 20)

Assembly

Step 10 Locate two ‘T’ bolts (d), fence spacers (c) and

at washers (i). Slide the ‘T’ bolts into the fence (K) ‘T’

slot and position the bolts roughly the width of the

extraction moulding (L) and place a fence spacer (c)

over the ‘T’ bolt thread. (See ﬁgs 51-52)

Figure 51-52

Step 11 Mount the dust shield (M) through the ‘T’

bolts (d), place a at washer (i) over the bolts and

secure using two locking knobs (b), see ﬁgs 53-54.

Fig 53

Fig 54

Mitre Fence Assembly

Step 1 Locate the mitre fence and extension (G),

Note: the bag of ﬁxings will be tucked inside the

extension assembly. Slide the two Hex bolts into

the extension ‘T’ slot. Insert the Hex bolt down into

the machined slots in the mitre fence and secure

the assembly with the two wing nuts, DO NOT

OVERTIGHTEN! (See ﬁg 55)

Mitre fence

extension

Hex bolt/washer

Wing nut

Step 2 Slide the mitre fence assembly (G) into the

tables ‘T’ slot, (see ﬁg 55).

Fig 55

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

Axminster Router Elevator Especificaciones Pagina 20